CBU180 - FHC Beveled 180 Degree Glass To Glass Clamp - Compare to BGC180, CP180 , Polished Chrome

• Compare to Beveled 180º Glass-to-Glass Clamp BGC180, 180 Glass to Glass Premier Series Clip CP180
• Fixed 180 Degree Glass to Glass Beveled Clamp
• Designed For 3/8"-1/2" (10 mm to 12 mm) Tempered Glass
• Designed to Secure Fixed 180 Degree Inline Glass Panels Together
• Requires One 3/4" Diameter Hole Drilled in Each Glass Panel
• Commonly used in Residential Bath and Commercial Hotel Applications

Only use tempered safety glass. To prevent damage to the hinge finish during installation, do not use power tools when installing these hinges.

FHC 180 Degree Glass to Glass Beveled Profile Clamps are designed for connecting inline fixed glass panels together. Glass fabrication is required, reference FHC's glass fabrication template for hole drilling and clearance requirements. These 180 Degree Glass to Glass Clamps have a wide range of uses outside typical shower applications. Use FHC Tru-Clear silicone to provide a water-tight seal after clamp installation.

For best results, keep the following recommendations in mind when caring for your FHC shower door hardware. Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle, cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.

High Quality Plated Solid Brass

WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit