Compare to Beveled Style 90º Glass-to-Glass Clamp BGC90, 90 Glass to Glass Premier Series Clip CP90 Fixed 90 Degree Glass to Glass Clamp Designed For 3/8"-1/2" (10 mm to 12 mm) Tempered Glass Designed to Secure Fixed 90 Degree Glass Panel Corners for Frameless Shower Applications Requires One 3/4" Dia Hole Drilled in Each Glass Panel Commonly used in Residential Bath and Commercial Hotel Applications Works with Mitered Corner or Overlapping Glass Conditions Glass Instructions Only use tempered safety glass. To prevent damage to the hinge finish during installation, do not use power tools when installing these hinges.
Overview FHC 90 Degree Glass to Glass Beveled Profile Clamps are designed for corner fixed glass panel conditions. Allow a 1/16 (1.5mm) clearance between the glass edges per the provided glass fabrication template. Use FHC Tru-Clear silicone to provide a water-tight seal after clamp installation.
Care & Cleaning Guidelines For best results, keep the following recommendations in mind when caring for your FHC shower door hardware. Your shower door should be dried daily with a soft towel or cloth to ensure its original finish. Do not use harsh cleaners or chemicals on the hardware, as many of the components are coated with a clear lacquer that will become damaged beyond repair. Always test your cleaning solution in an inconspicuous area prior to cleaning the entire hardware surface. Wipe surfaces clean using a soft, dampened cloth or sponge, and rinse completely with warm water immediately after applying the cleaning solution. Use only small amounts of liquid, gentle, cleaner. Never use abrasive products, sponges, or wire scrub brushes while cleaning hardware.
Material/Construction High Quality Plated Solid Brass
WARNING: This Product May Contain Chemicals Known to the State of California to Cause Cancer or Reproductive Harm. To Learn More Visit
More Information Product Name FHC Beveled 90 Degree Glass Clamp Item No CBU90 Compare To BGC90, CP90 Minimum Order 1 Each Downloadable Documents
This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.
This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.