Compare to NDC120, MC12 Glass shower “no fab” wall mount clamp For 1/2” glass For use with tempered or tempered/laminated glass Solid brass Attaches fixed panels on frameless glass shower enclosures Technical Specifications
Only tempered or tempered laminated glass may be used. Avoid using power tools during hinge installation as these may damage the finish. Product Details
These clamps are used to attach a fixed panel to an adjacent wall, ceiling, or floor without drilling holes in the glass. Rather, screws with nylon tips clamp the glass and hold it in place. Silicone must also be applied to seal and further secure the joint. Leaves less than 1/8” gap between the glass and the adjoining surface.
Warning When Using These Clamps
At least the top, bottom, and one side of panel must have clamps in place. A hinged door cannot be attached to a panel that is installed with these clamps. During installation, ensure that there is appropriate structural support for the safe use of these clamps. Cleaning Your Glass Simple Hardware
Dry hardware after use to minimize water spots and other discoloration. Avoid harsh or abrasive cleaning agents, scrub brushes, etc. as these will damage the finish. Use a mild mixture of gentle liquid soap and water and test on an inconspicuous part of the hardware first. After washing, thoroughly rinse with clean warm water and buff dry. ⚠️ WARNING: This product can expose you to chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, go to
This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.
This product is sold brand new. A manufacturer warranty applies only when the manufacturer provides one for this item.
Return requests must be submitted within 14 days of delivery and approved by our RMA department before the item is shipped back. Non-defective returns may be subject to a minimum 25% restocking fee and return shipping charges. Unauthorized returns are not eligible for credit or refund. Read the full return policy.